主营:称重测力传感器;压力传感器;位移传感器;角度传感器以及变送器与显示仪表等。
手机网站 | 联系我们:0755-23593495 | 加入收藏
  • 当前位置:深圳市赛德力检测设备有限公司 > 产品中心 > 日本品牌 > 日本Liniax 小型速度计NPS行程检测设备 变送器PR2 原装正品

    日本Liniax 小型速度计NPS行程检测设备 变送器PR2 原装正品

    产品型号: NPS / PR2
    品  牌: 日本Liniax
    • ≧1 台
      ¥30000.00
    所 在 地: 广东深圳龙岗区
    更新日期: 2025-06-09
    详细信息
     品牌:日本Liniax  型号:NPS / PR2  加工定制:否  
     测量范围:1  测量精度:1  尺寸:1 mm 
     重量:1 ㎏ 电源:1  尺寸:1 mm 
    日本Liniax  小型速度计NPS行程检测设备 变送器PR2 原装正品
     

     
    型式
    Type
    NPS 検出方式
    Detection Method
    ポテンショ式
    Potentiometer type
    外囲器構造
    Structure
    防滴構造 (IP55相当)
    Drip proof (IP55)
    塗装色
    Color
    マンセル 7.5 GY 7/2
    Munsel No. 7.5 GY 7/2
    計測範囲
    Measuring range
    ストローク(Stroke): 0~400 - 0~2000mm
    可動範囲
    Mobile range
    MAX. 2100mm
    (可動範囲は計測範囲によって変わります。)
    (The range of movement changes depending on the range of the measurement.)
    全抵抗値
    Total resistance
    5kΩ±5%
    ワイヤステ長さ
    Wire Discard Length
    2m リール張力
    Reel Tension Power
    10N±50%
    外部接続
    Connection
    ケーブル直出し形(MVV-S 1.25s、3C、10m付け[ケーブルの長さは仕様による])
    Attached cable MVV-S 1.25sq, 3C, 10m (The length of the cable depends on the specification.)
    使用温度・湿度
    Operating Temp.&Hum.
    0~55℃
    95%R.H.以下(結露不可)
    Within 95%R.H.(Disapprove of dew)
    絶縁抵抗
    Insulation resistance
    各端子-筐体間 100MΩ以上/DC.500V
    MIN. 100MΩ/DC.500V at Each terminal - Frame ground
    重量
    Weight
    1.4kg (ケーブル含まず)
    (A cable is excluded)
    付属品
    Attachment
    ワイヤークリップ
    Wire crip
    型式
    Type
    PR2 外囲器構造
    Structure
    防塵構造、DINレール取付型(35mmレールを使用)
    Dust proof. DIN rail installation type (35mm rail is used).
    電源
    Power
    AC.90~121V 50/60Hz 1φ 消費電力
    Consumption power
    3.5VA (検出器含む)
    (A detector is included)
    アナログ出力
    Analogue output
    ストローク(Stroke): 4~20mA
    精度
    Accuracy
    ストローク(Stroke):±0.5% F.S. 
    (検出器を含む)(A detector is included)
    負荷抵抗
    Load resistance
    MAX.750Ω
    絶縁抵抗
    Insulation resistance
    各端子-グランド端子間 100MΩ以上/DC.500V
    MIN. 100MΩ/DC.500V at Each terminal - Ground terminal
    使用温度・湿度
    Operating Temp.&Hum.
    0~55℃
    95%R.H.以下(結露不可)
    Within 95%R.H.(Disapprove of dew)
    オートリセット機能
    Auto reset function
    基準点設定範囲においてリセット操作により4mAを出力します。
    リセット操作は機器前面押しボタンまたは、リセット端子の短絡により行います。
    4mA is output by the reset operation within the range of the reference point setting.
    The reset operation is done by the short-circuit of an equipment front push-button or the reset terminal.
    メモリ機能
    Memory function
    電源OFF時,出力記憶機能付
    (10時間の通電で約20日間バックアップします)
    At power supply OFF. this with output memory function.
    (If the power supply was connecting for 10 hours. It backup by about 20 days)
    基準点設定範囲
    Reference point.
    setting range
    +100mm(基準点設定範囲は計測範囲によって変わります。)
    (The range of the reference point setting changes depending on the range of the measurement)
    外部接続
    Connection
    端子接続 (M3)
    Terminal connection (M3 for JIS Standard)
    重量
    Weight
    0.4kg 塗装色
    Color
    白色
    White
  • 留言
    标  题: *(必填)
    内  容: *(必填)
    联系人:
    邮  箱:
    手  机:
    固  话:
    *(必填)
    公  司: *(必填)
    地  址: *(必填)
版权所有 © 深圳市赛德力检测设备有限公司
联系人:朱先生  联系电话:0755-84583667  传真:0755-23593495
联系地址:深圳龙岗区龙城街道如意路中粮祥云1栋A座1120

技术支持:谷瀑     免责申明     粤ICP备13030144号